HashiDays One conference. Three cities. Find a city near you
Vault
Vault

Deploy Vault on Amazon EKS Anywhere

  • 14min
  • |
  • Vault
  • Terraform

This tutorial provides guidance on deploying Vault in Amazon Elastic Kubernetes Service (EKS) Anywhere. Amazon EKS Anywhere is a new deployment option for Amazon EKS that allows customers to create and operate Kubernetes clusters on customer-managed infrastructure, supported by AWS. There are several layers in this stack and this tutorial will help you set up your infrastructure end-to-end.

The bottom-most layer of the stack consists of Bare Metal with VMware's vSphere as the first layer of abstraction. Amazon EKS runs on top of that as the Kubernetes distribution with Vault running as the secrets manager for it.

Prerequisites

The following prerequisites are required to follow the steps in this tutorial:

Note

If you already have a Amazon EKS Anywhere cluster, skip to deploy Vault on Amazon EKS Anywhere section.

Note

If you already have a VMware vCenter deployment with these prerequisites, skip to the deploy Amazon EKS Anywhere on vCenter section.

Download required files

  1. Launch the vSphere downloads page. Under Enterprise, select VMware vCenter Server 7.0.3 (or the latest version). Select the GO TO DOWNLOAD link, and then click the DOWNLOAD NOW button.

  2. Launch the vSan Management SDK for Python page. Click the DOWNLOAD button to download v7.0.3 (or the corresponding latest version to the previous step).

  3. Upload the VMware-VCSA-all-<version>.iso into Amazon S3 bucket to a folder path of your choice, using vcsa-iso-image.

    List S3 objects to discover the vcsa-iso-image path.

    $ aws s3 ls

    Upload the VMware-VCSA-all-<version>.iso into Amazon S3 bucket.

    $ aws s3 cp /local/path/to/VMware-VCSA-all-7.0.3-<version>.iso s3://vcsa-storage-bucket

  4. Upload the Python scripts you downloaded earlier which is located at bindings > vsanmgmtObjects.py to the Amazon S3 folder. 

    $ aws s3 cp /<file_path>/vsan-sdk-python/bindings/vsanmgmtObjects.py s3://vcsa-storage-bucket

  5. Upload the Python scripts located at samplecode > vsanapiutils.py to the Amazon S3 bucket.

    $ aws s3 cp /<file_path>/vsan-sdk-python/samplecode/vsanapiutils.py s3://vcsa-storage-bucket

  6. The Amazon S3 bucket should look simiar to following 

    Object Store Root: 
    | 
    |__ Bucket_Name 
        | 
        |__ VMware-VCSA-all-7.0.3-18700403.iso
        | 
        |__ vsanapiutils.py
        | 
        |__ vsanmgmtObjects.py

    Note

    For more information, refer the Equinix vSphere GitHub repository.

Deploy vCenter

  1. To setup vCenter cluster using Equinix Bare Metal services follow these steps, for a more detailed setup follow the instructions on their website.

  2. Create a eksa folder and change the working directory to eksa.

    $ mkdir eksa && cd eksa

  3. Clone the terraform repository.

    $ git clone https://github.com/equinix/terraform-metal-vsphere

  4. Set the working directory to terraform-metal-vsphere.

    $ cd terraform-metal-vsphere

  5. Launch the Equinix console, and select Personal settings > Personal API keys > create. Make a note of the API key value.

  6. From the Equinix console, click top-right on your name and select settings > org settings > General > Account Id. Make a note of the org ID.

  7. From the Equinix console, select Personal settings > Project Id and copy the project ID.

  8. Use your preferred text editor, create a file named, terraform.tfvars as follow. Change the facility value matches to your preference.

    terraform.tfvars

    # Equinix vars
auth_token      = "<API_TOKEN_FROM_STEP_12.a>"
organization_id = "<ORG_TOKEN_FROM_STEP_12.b>"
project_id      = "<PROJECT_ID_FROM_STEP_12.c>"
create_project  = false
facility        = "da11"

# AWS vars
Object_store_tool        = "s3"
Object_store_bucket_name = "vcsa-storage-bucket"
s3_url                   = "https://s3.us_west_1.amazonaws.com"
vcenter_iso_name         = "VMware-VCSA-all-<version>.iso"
s3_access_key            = "<AWS_ACCESS_KEY>"
s3_secret_key            = "<AWS_SECRET_KEY>"
s3_version               = "S3v4"

  9. Perform a terraform init to pull down the necessary provider resources.

    $ terraform init

  10. Run terraform apply and review the planned actions. Your terminal output should indicate the plan is running and what resources will be created.

    $ terraform apply

...snip...

Do you want to perform these actions?
  Terraform will perform the actions described above.
  Only 'yes' will be accepted to approve.

  Enter a value: yes

    When prompted, enter yes to confirm and resume.

    Warning

    If you get the “folder not present” error at any step, destroy the terraform resources using `terraform destroy` and edit the `main.tf`. Replace all locations of `$HOME` to `/root`. The output includes the following.
    bastion_host = "<ip_address_of_bastion>"
ssh_key_path = "/Users/<username>/.ssh/vmware-on-metal-1-<>-key"
vcenter_fqdn = "vcva.metal.local"
vcenter_ip = "<ip_address_of_vcenter>"
vcenter_password = <vcenter_alphanumeric_password>
vcenter_root_password = <vcenter_root_alphanumeric_password>
vcenter_username = "Administrator@vsphere.local"
vpn_endpoint = "<ip_address_of_vpn>"
vpn_password = <vpn_alphanumeric_password>
vpn_psk = <vpn_psk_alphanumeric_password>
vpn_user = "vm_admin"

Setup VPN to connect to vCenter cluster via CLI (Optioal)

Note

This step is optional, you can SSH into the bastion to perform all of the vCenter operations.

There is an L2TP IPsec VPN client for every platform. You need to reference your operating system's documentation on how to connect to an L2TP IPsec VPN. Make sure to enable all traffic to use the VPN (aka do not enable split tunneling) on your L2TP client.

Warning

Some corporate networks block outbound L2TP traffic. If you are experiencing issues connecting, try a guest network or personal hotspot to see if that is the case.

Deploy Amazon EKS Anywhere on vCenter

If you’re using a self deployed vCenter cluster, refer the Amazon EKS Anywhere create production cluster guide.

  1. Login to vCenter and create resource pool under Metal (Datacenter) > Metal1 (Cluster) > EKSA (New resource Pool). vCenter dashboard

  2. Install eksctl and eksctl-anywhere with homebrew.

    Note

    Refer to the Install EKS Anywhere documentation for more details.

    $ brew install aws/tap/eks-anywhere

  3. Verify the installed version. 

    $ eksctl anywhere version

  4. Generate a yaml file to deploy Amazon EKS Anywhere.

    $ CLUSTER_NAME=mgmt eksctl anywhere generate clusterconfig $CLUSTER_NAME \
   --provider vsphere > eksa-mgmt-cluster.yaml

  5. Edit the control plane configuration in eksa-mgmt-cluster.yaml.

    eksa-mgmt-cluster.yaml

    …
…
controlPlaneConfiguration:
  count: 2
  endpoint:
    host: "172.16.0.150" # required unique IP outside DHCP block
  machineGroupRef:
…
…

    The CIDR block is defined, and the first 100 IPs are reserved for DHCP, so a good one would be 172.16.0.150.

  6. Install govc CLI from the vmware/govmomi repository.

  7. Set the GOVC_INSECURE environment variable value to 1 to disable certificate verification.

    $ export GOVC_INSECURE=1

  8. Set the GOVC_URL environment variable to the URL of ESXi or vCenter instance to connect to.

    $ export GOVC_URL=145.40.103.170

  9. Set the GOVC_USERNAME environment variable to the usename to use if not specified in GOVC_URL.

    $ export GOVC_USERNAME="Administrator@vsphere.local"

  10. Set the GOVC_PASSWORD environment variable value to the password to use if not specified in GOVC_URL.

    $ export GOVC_PASSWORD="<VCENTER_PASSWORD>"

  11. Use govc CLI to retrieve info about vCenter cluster. 

    $ govc datacenter.info

Name:                Metal
  Path:              /Metal
  Hosts:             3
  Clusters:          1
  Virtual Machines:  11
  Networks:          2
  Datastores:        4

  12. Use the private network for VMs in configuration: vCenter console > Network.

  13. Generate thumbprint for vSphere. This is required when the connection is not insecure.

    $ govc about.cert -thumbprint -k

145.40.103.170 61:B3:02:85:48:3F:A7:44:0E:3B:A0:AF:E8:38:11:62:79:16:E9:21

  14. Edit the vSphere Data center configuration with the information gathered from the previous step.

    eksa-mgmt-cluster.yaml

    …
…
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: VSphereDatacenterConfig
metadata:
  name: eks-mgmt
spec:
  datacenter: "Metal" #required 
  insecure: false #setting it to true might throw error
  network: "VM Private Net 1" #required 
  server: "145.40.103.170" #required - vSphere server
  thumbprint: "61:B3:02:85:48:3F:A7:44:0E:3B:A0:AF:E8:38:11:62:79:16:E9:21"
…
…

    Warning

    There are some issues when setting the connection as insecure (as of Feb 2022), the Amazon EKS Anywhere team is working on resolving it.

  15. Edit vSphere machine configs to use the appropriate datastore and resource pool.

    eksa-mgmt-cluster.yaml

    …
…
kind: VSphereMachineConfig
metadata:
  name: mgmt-cp
spec:
  datastore: vsanDatastore #required 
…
…
  resourcePool: /Metal/host/Metal-1/Resources/EKSA #required
…
…
kind: VSphereMachineConfig
metadata:
  name: mgmt
spec:
  datastore: vsanDatastore #required 
…
…
  resourcePool: /Metal/host/Metal-1/Resources/EKSA #required
…
…
kind: VSphereMachineConfig
metadata:
  name: mgmt-etcd
spec:
  datastore: vsanDatastore #required 
…
…
  resourcePool: /Metal/host/Metal-1/Resources/EKSA #required
…
…

  16. Set the EKSA_VSPHERE_USERNAME environment variable.

    $ export EKSA_VSPHERE_USERNAME='Administrator@vsphere.local'

  17. Set the EKSA_VSPHERE_PASSWORD environment variable.

    $ export EKSA_VSPHERE_PASSWORD='<VCENTER_PASSWORD>'

  18. Set the EKSA_LICENSE environment variable. This is not required if you already have one.

    $ export EKSA_LICENSE='my-license-here'

  19. Deploy Amazon EKS Anywhere.

    $ eksctl anywhere create cluster -f eksa-mgmt-cluster.yaml

    Output

  20. Store the kubeconfig file. You need to store kubeconfig in bastion or use VPN from the optional step.

    $ export KUBECONFIG=${PWD}/${CLUSTER_NAME}/${CLUSTER_NAME}-Amazon EKS Anywhere-cluster.kubeconfig

  21. Display the nodes of the cluster.

    $ kubectl get nodes

NAME           STATUS   ROLES                  AGE   VERSION
172.16.0.134   Ready    <none>                 16d   v1.21.6
172.16.0.53    Ready    <none>                 16d   v1.21.6
172.16.0.63    Ready    control-plane,master   16d   v1.21.6
172.16.0.97    Ready    control-plane,master   16d   v1.21.6

Deploy Vault on Amazon EKS Anywhere

Vault installation on Amazon EKS Anywhere is same as any kubernetes installation. For a step-by-step intruction, refer to the Vault on Kubernetes Deployment Guide.

  1. Create a vault directory and change the working directory to the vault directory.

    $ mkdir vault && cd vault

  2. Create a configuration file to configure Vault installation.

    $ vi config.yaml
server:
  standalone:
    enabled: true
    config: |
      ui = true

      listener "tcp" {
        tls_disable = 1
        address = "[::]:8200"
        cluster_address = "[::]:8201"
      }
      storage "file" {
        path = "/vault/data"
      }
  service:
    enabled: true
ui:
  enabled: true
  serviceType: NodePort

  3. Create a new namespace for the Vault installation.

    $ kubectl create ns vault

  4. To access the Vault Helm chart, add the Hashicorp Helm repository.

    $ helm repo add hashicorp https://helm.releases.hashicorp.com

  5. Install the Vault helm chart. 

    $ helm install vault hashicorp/vault --namespace vault -f config.yaml

  6. Initialize and unseal Vault.

    $ kubectl exec --stdin=true --tty=true vault-0 -- vault operator init

Unseal Key 1: MBFSDepD9E6whREc6Dj+k3pMaKJ6cCnCUWcySJQymObb
Unseal Key 2: zQj4v22k9ixegS+94HJwmIaWLBL3nZHe1i+b/wHz25fr
Unseal Key 3: 7dbPPeeGGW3SmeBFFo04peCKkXFuuyKc8b2DuntA4VU5
Unseal Key 4: tLt+ME7Z7hYUATfWnuQdfCEgnKA2L173dptAwfmenCdf
Unseal Key 5: vYt9bxLr0+OzJ8m7c7cNMFj7nvdLljj0xWRbpLezFAI9

Initial Root Token: s.zJNwZlRrqISjyBHFMiEca6GF

    The output displays the key shares and initial root key generated.

    Note

    These keys are critical to both the security and the operation of Vault and should be treated as per your company's sensitive data policy.

  7. Unseal the Vault server using the unseal keys until the key threshold is met.

    $ kubectl exec --stdin=true --tty=true vault-0 -- vault operator unseal 
Unseal Key (will be hidden):

    When prompted, enter the Unseal Key 1 value.

    $ kubectl exec --stdin=true --tty=true vault-0 -- vault operator unseal 
Unseal Key (will be hidden):

    When prompted, enter the Unseal Key 2 value.

    $ kubectl exec --stdin=true --tty=true vault-0 -- vault operator unseal 
Unseal Key (will be hidden):

    When prompted, enter the Unseal Key 3 value.

  8. Validate that Vault is up and running. 

    $ kubectl get pods --selector='app.kubernetes.io/name=vault'

NAME                                    READY   STATUS    RESTARTS   AGE
vault-0                                 1/1     Running   0          1m49s
vault-1                                 1/1     Running   0          1m49s

  9. Display all Vault services.

    $ kubectl get services -n vault --selector='app.kubernetes.io/name=vault-ui'

NAME       TYPE       CLUSTER-IP      EXTERNAL-IP   PORT(S)          AGE
vault-ui   NodePort   10.97.113.241   <none>        8200:30096/TCP   16d

  10. Display the nodes of the cluster.

    $ kubectl get nodes

NAME           STATUS   ROLES                  AGE   VERSION
172.16.0.134   Ready    <none>                 16d   v1.21.6
172.16.0.53    Ready    <none>                 16d   v1.21.6
172.16.0.63    Ready    control-plane,master   16d   v1.21.6
172.16.0.97    Ready    control-plane,master   16d   v1.21.6

  11. Install the HashiCorp tap, a repository of all our Homebrew packages.

    $ brew tap hashicorp/tap

  12. Install Vault with hashicorp/tap/vault.

    $ brew install hashicorp/tap/vault

  13. Set the VAULT_ADDR environment variable. Since we exposed Vault using NodePort, Vault will be available at 172.16.0.97:8200. Access it from your bastion host or VPN from the optional step.

    $ export VAULT_ADDR='http://172.16.0.97:30096'

  14. Set the VAULT_TOKEN environment variable value to the initial root token value generated during the Vault initialization.

    $ export VAULT_TOKEN="s.zJNwZlRrqISjyBHFMiEca6GF"

  15. Enable the kv secrets engine.

    $ vault secrets enable -path=kv kv

Success! Enabled the kv secrets engine at: kv/

  16. Store some test data at kv/hello.

    $ vault kv put kv/hello target=world

Key                Value
---                -----
created_time       2022-03-21T21:23:00.540998543Z
custom_metadata    <nil>
deletion_time      n/a
destroyed          false
version            1

  17. Read the stored data to verify. 

    $ vault kv get kv/hello

======= Metadata =======
Key                Value
---                -----
created_time       2022-03-21T21:23:00.540998543Z
custom_metadata    <nil>
deletion_time      n/a
destroyed          false
version            1

===== Data =====
Key       Value
---       -----
target    world

Configure Kubernetes auth method

Note

Refer to the Vault Agent with Kubernetes tutorial for more details.

  1. Retrieve the additional configuration by cloning the hashicorp/learn-vault-agent repository from GitHub.

    $ git clone https://github.com/hashicorp-education/learn-vault-agent

  2. Change the working directory to learn-vault-agent/vault-agent-k8s-demo.

    $ cd learn-vault-agent/vault-agent-k8s-demo

  3. Update the vault-auth service account.

    $ kubectl apply --filename vault-auth-service-account.yaml

  4. Create a read-only policy, myapp-kv-ro in Vault.

    $ vault policy write myapp-kv-ro - <<EOF
path "secret/data/myapp/*" {
    capabilities = ["read", "list"]
}
EOF

  5. Create some test data at the secret/myapp path.

    $ vault kv put secret/myapp/config \
      username='appuser' \
      password='suP3rsec(et!' \
      ttl='30s'

  6. Set the K8S_HOST environment variable value to minikube IP address.

    $ export K8S_HOST=$(kubectl config view --raw --minify --flatten \
    --output 'jsonpath={.clusters[].cluster.server}')

  7. Enable the Kubernetes auth method at the default path.

    $ vault auth enable kubernetes

Success! Enabled kubernetes auth method at: kubernetes/

  8. Configure the kubernetes auth method.

    Version compatibility

    Starting in v1.24, Kubernetes will no longer auto-generate the Secret object. So, for the best compatibility with recent Kubernetes versions, ensure you are using Vault v1.9.3 or greater.

    $ vault write auth/kubernetes/config \
     kubernetes_host="$K8S_HOST"

    Output: 

    Success! Data written to: auth/kubernetes/config

  9. Create a role named, example, that maps the Kubernetes Service Account to Vault policies and default token TTL.

    $ vault write auth/kubernetes/role/example \
     bound_service_account_names=vault-auth \
     bound_service_account_namespaces=default \
     token_policies=myapp-kv-ro \
     ttl=24h

    Output: 

    Success! Data written to: auth/kubernetes/role/example

Verify the Kubernetes auth method configuration

  1. Create a variable named EXTERNAL_VAULT_ADDR.

    $ export EXTERNAL_VAULT_ADDR="172.16.0.97:30096"

  2. Define a Pod with a container.

    $ cat > devwebapp.yaml <<EOF
apiVersion: v1
kind: Pod
metadata:
  name: devwebapp
  labels:
    app: devwebapp
spec:
  serviceAccountName: vault-auth
  containers:
    - name: devwebapp
      image: burtlo/devwebapp-ruby:k8s
      env:
        - name: VAULT_ADDR
          value: "http://$EXTERNAL_VAULT_ADDR:8200"
EOF

    The Pod is named devwebapp and runs with the vault-auth service account.

  3. Create the devwebapp pod in the default namespace

    $ kubectl apply --filename devwebapp.yaml --namespace default

  4. Display all the pods in the default namespace.

    $ kubectl get pods

NAME        READY   STATUS    RESTARTS   AGE
devwebapp   1/1     Running   0          77s

    Wait until the devwebapp pod is running and ready (1/1).

  5. Start an interactive shell session on the devwebapp pod.

    $ kubectl exec --stdin=true --tty=true devwebapp -- /bin/sh
#

    Your system prompt is replaced with a new prompt #.

  6. Set KUBE_TOKEN to the service account token.

    $ export KUBE_TOKEN=$(cat /var/run/secrets/kubernetes.io/serviceaccount/token)

  7. Authenticate with Vault through the example role with the KUBE_TOKEN.

    $ curl --request POST \
    --data '{"jwt": "'"$KUBE_TOKEN"'", "role": "example"}' \
    $VAULT_ADDR/v1/auth/kubernetes/login

    Example output: 

    {
  "request_id": "2febc920-6feb-182a-19cd-c95c0cd70bf7",
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": null,
  "wrap_info": null,
  "warnings": null,
  "auth": {
    "client_token": "s.ZOZk5OkIW1rbdMEqGmwJW7vj",
    "accessor": "yPwZcQG6LP721LryKzkgA4eA",
    "policies": [
      "default",
      "myapp-kv-ro"
    ],
    "token_policies": [
      "default",
      "myapp-kv-ro"
    ],
    "metadata": {
      "role": "example",
      "service_account_name": "vault-auth",
      "service_account_namespace": "default",
      "service_account_secret_name": "",
      "service_account_uid": "649f0652-42ef-44ba-a416-76862bc1b6c3"
    },
    "lease_duration": 86400,
    "renewable": true,
    "entity_id": "3f684285-bc1c-6b9e-e580-4ce310c956b2",
    "token_type": "service",
    "orphan": true
  }
}

Next steps

In this tutorial, you deployed Vault on an Amazon EKS Anywhere cluster. Also, you enabled Kubernetes auth method so that Vault clients can authenticate with Vault using the trusted service account.

Help and reference

Previous

Vault installation to AKS via Helm

 Next

Injecting secrets via Vault Agent